Heath-consultants Gas Delivery Unit (GDUnet) Manuel d'utilisateur télécharger pdf (Page 43)

net

3-15

3.3.7 GDUnet Selection

                     net must have the



         net registered on the network, in the ‘Send

To’ section, click the drop down arrow and select the required

net, as illustrated in Fig. 3-17.

Fig. 3-17 GDUnet Selection

3.3.8 Test or Calibrate Selection

‘Send To’ also contains the selection to ‘Te st’ or ‘Calibrate’

instruments as the required process.

• The ‘Test’ process is selected to simply apply gas then

record instrument status.

This process does not update instrument calibration

settings in any way.

• The ‘Calibrate’ process is selected to perform a full

calibration of the instrument. Gases are applied and the

instrument settings are automatically adjusted until the

instrument reading is the same as each gas applied.

This process updates stored data including new ‘cal-due’

date.

To select ‘Test’ or ‘Calibrate’ option, select the appropriate ‘radio’

button, highlighted in Fig.3-18.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 108 109

Pas de commentaire

Heath-consultants Gas Delivery Unit (GDUnet) Manuel d'utilisateur Page 43