Heath-consultants Aqua-Scop Manuel d'utilisateur télécharger pdf (Page 12)

C. Direct Contact Microphone (Part No. 2916428)

(Figure 5)

1. General Specications:

Construction: Cold rolled steel case. Stainless steel

sensor shaft, probe tip, and extension

rods. Rods are 5/16” diameter. All

threaded sections are #10-32 thread.

Poured in place, the urethane core

suspends the sensor shaft in the body

for acoustical isolation. Each Direct

Contact extension is 24” long.

Sensor: Piezo-Ceramic, resonant at

approximately 3000 Hz.

Frequency

Response: Approximately 300-6000 Hertz.

The Direct Contact Microphone, microphone tip, optional magnet,

and two extensions are depicted in Figure 5. All threaded joints are

stainless steel on the Direct Contact Microphone; probe tip, and the

extensions. The 1/4” plug mates with the 1/4” jack labeled “M” on

the Amplier Module via one of the two Microphone Cables.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 38 39

Pas de commentaire

Heath-consultants Aqua-Scop Manuel d'utilisateur Page 12